Gray Pride NC9175494

Gray Pride NC9175494 is produced based on nitrocellulose resin and used in different industries.

with the specifications of quick drying and flexibility and resistance against humidity,

corrosion, hit, abrasion, and other mechanical properties and suitable for cold and warm, dry and humid conditions and steams.

Instruction of use Gray Pride NC9175494

Mixture of 100 parts paint, 50 parts of hardener 251 and 10-30 parts of thinner.

so that the density with DIN 4 at a temperature of 20 degrees centigrade reaches between 15 to 17

seconds should be prepared and sprayed with a thickness of 20 to 30 microns twice to three times immediately after mixture.

The time interval between each spray should be 5 minutes. When working with a sprayer with an upper paint holder

with an output of 1.2 to 1.5 mm or with a sprayer with a lower paint holder with a 1.4 to 1.6 mm

the air pressure should be tuned at 3 to 4 atmosphere and 24 hours after spraying use sand paper and polish in order to achieve a definite quality.

Application Gray Pride NC9175494

These paints are applied on putty and undercoat of metal and polymeric components and partly on the iron sheets.

Packaging Gray Pride NC9175494

These paints are currently offered in 1 to 20 liter packages and may also be supplied on any requested quantity.    

Safety precautions Gray Pride NC9175494

These products should always be kept out of reach of children.

They should also be kept away from heat due to inflammability. When working with the paints a ventilation system and suitable clothes,

goggles and masks should certainly be used and in the event of eye contact,

the eye should be washed with plenty of water immediately and the individual should be referred to the nearest treatment center.