Patina on wood

Do not worry about disposing of household furniture when it is damaged. With the patina technique on wood, your oldest furniture becomes a luxury decorative item.

There are different types of wood and they differ in texture and cohesion.
In common parlance, wood is divided into two categories, soft and hard, each of which has a specific function.
The colorability of wood also varies depending on the texture and density of the wood.
Some colors are able to show the knots and waves of wood, and some types of colors have a coating nature.

This means that after painting the wood, wooden knots can not be exposed.
These colors in a wide range can cover the desired wood.

Patina on wood is also a type of wood coating that acts as a coating paint.
In fact, patina on wood is considered to be a combination of several colors and creating different colored layers on wood.
In cases where there is a desire to create color variation on wood, the patina technique on wood is an acceptable option.
Today, most of the wood used is in the form of chipboard with veneer and can be seen in the most beautiful way possible with patina.
It is even possible to use a background contrasting with the color of the streaks in this technique and it only requires training and practice.

Patina training on wood

First, choose the right wood for your patina.
This wood can even be coated with chipboard.
First you have to clean the surface of the wood so that no trace of dirt remains on the wood.
Use some white alcohol to clean the wood surface.
Patina on wood is done in different ways, here are some of the most important techniques:

1- Patina with color ink

Ink is a dilute material that is used as a color primer in ink patins.
If the paint ink is slightly concentrated, it can be diluted with instant thinner or industrial alcohol.
Paint ink can be applied to the work surface with a lint-free cloth, spray gun or brush.
It is necessary to completely dry the work surface after a layer of painting.

Then the second painting can be done. The third painting causes the disappearance of the brush and fabric traces, a uniform color will be created on the wood.

2- Patina by water-soluble paints

This type of work can not create a general coating and only paints the light parts of the wood so that the wood knots can be seen better.
Mix water-soluble paints with linseed oil and apply with a brush.
Wipe the work surface in the same way with the other hand and a lint-free cloth.
This should be done before the paint dries and requires a bit of speed.

3- Patina on wood with varnish

Combine a 100-gram can of lacquer with a glass of ethylene alcohol and begin patina.
This technique can be applied like paint ink with cotton or napkin and is mostly used to preserve the natural color of wood.
Varnish prevents corrosion and moisture penetration into the wood.

4 - Patina on wood with shapan

Shapan is a type of wood coating that is basically melted bitumen.
Dilute the shapan a little and rub it on the wood surface with a cloth.
Shapan solvent is also a thinner for oil, petroleum and gasoline.
As a result of practice, you can create beautiful movements on the work surface.

5 - wood patina with oil paint

Oil paints, which are often used in painting buildings, are suitable for oil patina on wood.
The method is also more common in the following three ways:

Cover the entire surface of the wood with a thick oil paint.
  Finally, using lighter colors, you can create custom designs on the surface.
  First, as in the previous method, paint the entire work surface and let the work dry completely.
  Then apply a very dilute gold paint using a toothbrush or cloth on areas of wood as desired.
  Cover the whole work with oil paint and if the paint is not completely dry yet, remove some paint from the desired areas.
  To do this, use a lint-free cloth and a little oil thinner.

Proposal:

The oil patina technique can be used a little more beautifully and creatively with oil paint.
It is better to dry the work completely, then complete the work with spray paints contrasting with the main color.
With a little practice, you can create beautiful spots on the work surface with spray with the distance and proximity of the hand.

tip:
It is better to keep your hands relatively far from the work surface.
The spray reduces the beauty of the patina on the wood at closer distances.

Article Source: sadra