Beige Nitrocellulose Primer 604

beige nitrocellulose primer is based on nitro resin and cellulose.
It has coating properties, filling, flexibility, adhesion, hardness and resistance in any weather conditions, including hot and cold, dry and wet and other vapors.

In the face of impact, water, abrasion has high strength.

nitrocellulose primer is available in various factory colors, gray, beige, cream, white and other colors.

Instructions for using Beige Nitrocellulose Primer 604

100 parts of paint, 50 parts of instant A2P thinner, so that in religion 4 at 20 degrees it is 15 to 17 seconds.
Immediately after mixing with a thickness of 20 to 30 microns at a time, spray 2 to 3 times, so that the time interval between each spray is 5 minutes.

When working, use the spray bowl on the bowl with 1/2 to 1/5 mm nozzle or the spray bowl on the bottom

of the bowl with 1/4 to 1/6 mm nozzle with a load pressure of 3 to 4 atmospheres.

Applications Beige Nitrocellulose Primer 604

Instant nitrocellulose primer can be used as an intermediate layer in the role of a very resistant adhesive between

the surface paint and surfaces such as iron, steel, previous paints, putties, etc.

packaging Beige Nitrocellulose Primer 604

Instant nitrocellulose liner is in the dimensions of 1 and 20 liters.

(It is possible to receive the order in other dimensions)

Safety precautions White Nitrocellulose Primer 600

These products should always be kept out of reach of children.

They should also be kept away from heat due to inflammability.

0When working with the paints a ventilation system and suitable clothes, goggles and masks should certainly be used and in the event of eye contact,

the eye should be washed with plenty of water immediately and the individual should be referred to the nearest treatment center.